Glass Drilling & Shaping in Dubai
Holes, notches and shaped edges cut into glass for hinges, handles, taps and fittings.
Free site visit & quotationPhoto quotes on WhatsApp
About this service
Glass can be drilled, notched and shaped for fittings such as hinges, handles, taps and brackets. Holes must be made before toughening, so positions are fixed in advance.
Problems we fix
- Holes for hinges and handles
- Notches and cut-outs for fittings
- Holes for tap and wall brackets
- Shaped corners and edges
- Polishing of drilled holes
How it works
- Mark positions
Hole sizes and positions are marked and checked against your fittings. - Drill and shape
Holes and shapes are made with diamond tools on untoughened glass. - Finish and test
Edges are polished and we test the fitting before supplying the glass.
Dubai conditions
Holes should sit well away from edges and corners, because glass is weakest there. We advise on safe positions.
Questions
Can toughened glass be drilled?
Only before it is toughened. After toughening, drilling will break it.
How far from the edge can a hole be?
As a rule, holes need distance from edges and corners. We advise per pane.
Do you polish the holes?
Yes, drilled holes are smoothed so they do not chip.